BRQNZ - MIL-P-24441/3C F0152 WHITE P/N 5827
- MSDS: BRQNZ
- Manufacturer: INTERNATIONAL PAINT CO INC
- Product Name: MIL-P-24441/3C F0152 WHITE P/N 5827
- National Stock Number: 8010-00-410-8461
Product Identification
Product ID:MIL-P-24441/3C F0152 WHITE P/N 5827
MSDS Date:02/24/1993
FSC:8010
NIIN:00-410-8461
Kit Part:Y
MSDS Number: BRQNZ
Responsible Party
HOUSTON, TX 77292
US
Emergency Phone: 713-682-1711
Info Phone: 713-682-1711 / FAX 713-682-0065
Cage: 69827
Contractor
Telephone: 800-589-1267/800-854-6813
Cage: 69827
Ingredients
N-BUTYL ALCOHOL (1-BUTANOL) (VAPOR PRESSURE 4.0 MM HG @
CAS: 71-36-3
RTECS: EO1400000
Fraction By Weight: 25-30%
OSHA PEL 100 PPM
ACGIH TLV: S, C 50 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
REACTIVE POLYAMIDE
CAS: 68410-23-1
Fraction By Weight: 15-20%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: SEVERE IRRITANT. VISION
IMPAIRMENT EVEN BLINDNESS. CORROSIVE. IRREVERSIBLE EYE DAMAGE.
SKIN: IRRITATING. DERMATITIS. MAY CAUSE SENSITIZATION OR OTHER
ALLERGIC RESPONSES. INHALATION: IRRITATION OF RESPIRATORY TRACT.
HEADACHE AND DIZZINESS AND UNCONSCIOUSNESS. INGEST:
GASTROINTESTINAL IRRIT, NAUSEA, DIARRHEA.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY CONDITIONS
First Aid
First Aid:EYES: FLUSH IMMEDIATELY WITH COPIOUS QUANTITIES OF WATER FOR
15 MINUTES. GET MED AID IMMED. SKIN: REMOVE CONTAMINATED CLOTHING,
WASH SKIN WITH PLENTY OF SOAP & WATER. LAUNDER CLOTHES BEFORE
REUSE. INH ALATION: REMOVE TO FRESH AIR. GIVE ARTIFICIAL
RESPIRATION IF NEEDED. GET MEDICAL ATTENTION. INGESTION: CALL A
PHYSICIAN IMMEDIATELY TO DETERMINE WHETHER OR NOT TO INDUCE
VOMITING.
Fire Fighting
Flash Point:99.0F,37.2C
Lower Limits:1.4
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:SMOTHER FLAMES W/ABOVE EXTINGUISHING MEDIA.
USE WATER TO COOL CLSD CNTNR, NOT EXTINGUISH MEDIA. TAKE CARE TO
PREVENT SPREAD OF BURNING LIQ W/WATER.
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENT. DO NOT USE IN
AREAS WHERE SPARK OR OPEN FLAME ARE PRESENT. CLOSED CONTAINERS MAY
EXPLODE WHEN EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP WITH ABSORBENT
MATERIALS.
Handling
Handling and Storage Precautions:STORE IN BLDGS DESIGNED & PROTECTED
FOR STORAGE OF LIQUIDS W/NFPA CLASS I C. AVOID BREATHING DUST OR
CHIPS FROM SANDING OR BLASTING COATED SURFACES.
Other Precautions:CHRONIC OVEREXPOSURE TO AND MISUSE OF SOLVENTS HAS
BEEN LINKED TO PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE.
Exposure Controls
Respiratory Protection:IN OUTDOOR/OPEN AREAS W/UNRESTRICTED VENT, USE
NIOSH FILTER RESPIRATOR TO REMOVE AIRBORNE PARTICLES OF OVERSPRAY
DURING SPRAY APPLIC. IN RESTRICTED VENT AREA, USE NIOSH RESPIRATOR
IN ACCORD W/29 CFR 1 910.134 TO REMOVE PARTIC/VAPOR COMBINATN
Ventilation:VENT TO KEEP BELOW TLV & LEL AND TO REMOVE DECOMPOSITION
PRODUCTS DURING WELDING & FLAME CUTTING SURFACES COATED W/PROD.
Protective Gloves:WEAR CHEMICAL RESISTANT GLOVES
Eye Protection:SFTY GLASSES,CHEMICL GOGGLES,FACE SHIELD
Other Protective Equipment:WEAR APPROPRIATE IMPERVIOUS PROTECTIVE
CLOTHING TO PREVENT SKIN CONTACT.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE,
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:244F,118C
Vapor Density:> AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:26
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS
Stability Condition to Avoid:STORE AWAY FROM DIRECT HEAT, FLAME OR
SPARKS.
Hazardous Decomposition Products:CO, CO2, VARIOUS HYDROCARBON
FRAGMENTS, NITROGEN COMPOUNDS
Conditions to Avoid Polymerization:STORE AWAY FROM DIRECT HEAT, FLAME
OR SPARKS.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.